Then you lose the information about where the breach likely came from which in cases like the last breach, if very important to people. Plus, applying this to one sole email provider feels exceptionally dirty and misses the same pattern used by other providers (ie outlook.com).

What if you just stripped everything after the "+" and maybe the dots, but only for gmail adresses?
Since they're the largest email provider that actually ignores dots and everything after the plus(I think.)
There is a possibility of getting multiple entries by doing so, because besides finding out who added you to a mailing list and filtering out, another use of the plus and dots is registering multiple accounts with the same email adres on 1 site.

Adding my vote to this. Its completely understandable that it is a significant development effort for a very small percentage of people however that group would appreciate it greatly. I think the number of users who do plus aliasing is also a group that is strongly security aware and are more likely to be subscribers to HIBP. In fact in posting this comment I am using a plus aliased account.

I think people who use + emails are both more likely to use haveibeenpwned and less likely to have their passwords compromised due to being more selective about the websites they use.

It's not that simple Paul, there's a lot of other downstream impact by now having more data in the database than was originally in the breach. There are other processes this feeds into not to mention the way it changes the search for the reasons I've already mentioned.

At this point in time, the fact remains that this pattern is used by almost nobody based on the data I'm seeing in the breaches. I'll keep assessing it and I *would* like to do this at some point, but it'd be a very bad ROI on the effort right now.

I feel like you're making this too hard. If the input is troyhunt+bar@hotmail.com then just load it into your database as troyhunt@hotmail.com. done. Easy peasy. Strip the + during search, too. If a user searches troyhunt+bar@hotmail.com, give them results for troyhut@hotmail.com (which includes all results from all aliases).

Or if for data integrity you really want to keep the + addresses in the database, just load the address twice; once as troyhunt@hotmail.com and once as troyhunt+bar@hotmail.com (for the rare instances where a + is actually part of the e-mail).

You said these are in there very rarey, so you won't be duplicating much data. And for users who use +addresses, the website is somewhat useless. The whole point of +addresses is they're throwaway. I create one on the spot and forget I created it. It's not possible for me to search for every +address I've used. I'd rather have results that are overly cautious (troy.hunt@hotmail.com AND/OR an alias of troy.hunt@hotmail.com was pwned) than just not have any clue if an alias I used was pwned.

======

Alternatively, handle this on the search end. You allow domain owners to search for multiple addresses based on domain. Maybe if I prove I own troyhunt@hotmail.com then I can search for permutations (based on rules you setup). For gmail maybe you allow + and dot. For hotmail just +. Etc. If this is a rarely used feature then optimization probably isn't very important. Results could just come as a spreadsheet/json like the domain results do.

======

Re: the frequency.... If I were a spammer, whenever I saw a +address I would strip off the + and everything after it anyway. If any processing was done on these dumps, that could make the + seem even rarer... I do think this is a rarely used feature, but it could be a percentage point or two more frequent than it seems.

Hi Troy - first off thanks for the fantastic facility you provide via this website.

Personally I use gmail accounts for most things. With regard to the placement of the ‘.’, I only use two variants - one without any, and one with them in to make the address more readable, so that's not a big deal for me; however, I make heavy use of ‘+ addressing’, not necessarily for major websites, but for things like forums, newsletters, sites I think may spam etc.

I've been analyzing the haveibeenpwned report for our company domain. There are just over 1200 entries. Of those there are only 4 entries that are not included in the "Online Spambot" list, and those four are all genuine users.
As a sample I've gone through all users starting with a "c", and at most 12 of 144 are potentially genuine. The vast majority of the rest look to be auto-generated, plus some invalid ones but based on real users' surnames.

Based on those stats and also the unlikelihood of auto-generated spam email addresses being created with plus addressing, I therefore suspect any addresses that do contain plus addressing are very likely to be genuine accounts.

Extracting and entering into the site all the plus variants of my email addresses from my password safe, and then on an ongoing basis adding new ones every time I sign up to a site could be quite onerous.

I too use the +string method to identify sites that leaked my email address to spam lists. So this ofcourse results in a long list of variations of email.address+string@provider.com.
It would ofcourse be nice if I could receive HIBP notifications for all of them, without having to enter each of these email address permutations.

But I can understand that this request results in some difficulties, as mentioned by others in the topic.

To David's comments, it appears that the email provider of Brian Krebs DOES follow the spec to heart and differentiates between email addresses based on capitalization (see https://twitter.com/briankrebs/status/940362654434168833).
However, the implementation of the spec differs between providers. As mentioned earlier, Google doesn't care about the periods, some providers (or sites) don't allow the use of + or other signs, ...

The question for ignoring everything after a +-sign would be whether there are email providers who allow registering different email addresses based on the value behind the +-sign. I.e. could foobar+alice@provider.com be a different user than foobar+bob@gmail.com?

To David's comments, this shows how tricky the situation is; there's the spec, the practices by various mail providers and then the patterns people general use. I'm very cautious about making assumptions on these as they may not always hold true under all circumstances which then means ending up with a kludge of provider-specific hacks (i.e. always ignore the dot in Gmail addresses). I'm sure everyone can see the challenge and even if solved, there's still just that tiny percentage of people for whom it would make any difference at all.

Periods are significant in the local part of email addresses per RFC 3522 (https://tools.ietf.org/html/rfc5322#section-3.4.1).

Email addresses are case sensitive, and period, plus and hyphen are significant characters.

It's safe to assume that no sane system administrator is going to set up mailboxes that differ only incase, or where the local name is a bunch of quoted printable Emojis, etc. However, note that I used the word "sane" so there are probably thousands, maybe millions of systems doing it out there somewhere on the Internet. :P

Also, hyphen is valid in the global DNS system, and so whatever you do -- don't just strip it from the whole address. That causes significant problems for users whose domains actually have a minus sign in them.

But if you do this sort of normalization, easiest way is a set of regular expression substitutions based on the domain name. Since the local part is determined by the ISP in question, the rules have to vary and so you worry about the big guys.

FWIW - Gmail ignores "." in email addresses, so FirstLast@gmail.com and First.Last@gmail.com are identical.

Since Gmail address are so common, it would be worth while to strip out periods from all Gmail address when processing them.

Well, if anyone would know it'd be you. Thanks for your willingness to engage!

Mike, you'd be surprised at how mainstream the HIBP user base is, largely because of how much press it gets in the general media. But even if I was off by a factor of 10 (which I'm almost certainly not), in an incident like River City Media, the percentage of people using this pattern rounds to 0% even with 2 decimal points of precision!

I understand this is important to the people using it, but I need to look at the impact from the effort and at present, it remains near non-existent.

Troy, I'd argue that your user base is not represented by the data in breaches. Obviously a very small percentage of people in the world use a + in their email (as evidenced by your research). But, I'd wager that a much larger percentage of people using HIBP do.

I assume your hope is that even the most technologically illiterate users come to HIBP. However, I imagine that most users are already security conscious and don't fall into that group.

Since Antonios has left a comment and I've also just loaded the largest data set ever into HIBP, I thought I'd add a current figure to the discussion here:

0.0038% was the percentage of people with a + in their email address in the River City Media spam list. 1 in every 26k people is a hard ROI to justify when there's a fair bit of work to invest!

I'll keep monitoring the use of this pattern, but as of now, it remains *exceptionally* rare.

From your blogs I think you are using a Key, Value data structure, which means when a query comes, your data store needs an exact *key* to find the value (if it has been breached or not). That's probably the best data structure for HIBP since it can scale infinitely, however it will not allow you to query troy+*@hunt.com.. I guess the only way to address that is to either canonicalize the data as you add it, by removing everything after "+" (or ".", or "-"), which means this will only work with new data sets, or change the table schema / contents of "Value", which is very unlikely to happen.. Another solution would be to create a new "table" with all e-mails with "+", ".", or "-", and then query both when someone requests information, only that this time you format the "Value" of those "Keys" accordingly.. Although it may seem like a lot of work, the earlier it is done, the better it will be as it will include more datasets..

Unfortunatley there are some online-services that don't accept emailadresses with + sign. I had problems with 2 services in the last month.

To Kem's question, we're *always* talking tiny percentages. I just checked the last set of data I loaded which was a spam list and only 0.009% of emails used the + syntax.

This is something I still want to add folks, but it'll be to the benefit of a tiny percentage of the community.

Tony,

I'm in the 0.03% and have been for years. It's been a fantastic way to identify abusers of my email address. I'd love to see this feature implemented and would be glad to help any way I can.

The 0.03% stats appear to be from November 2014. Do you have more recent stats? (Today is November 29, 2016.) I'm curious if more people have caught on to this technique these days...

Thanks,
Kem

Since there's a comment in here about "go read the RFC", here's the RFC that describes subaddressing: https://tools.ietf.org/html/rfc5233